Bathroom faucet maintenance

    1. Please have experienced and qualified professionals to install. During installation, the faucet should try not to bump with hard objects, and do not leave cement, glue, etc. on the surface, so as not to damage the surface coating gloss. If your faucet is used in a newly built house, because the water supply network is newly paved, there will definitely be impurities such as sand particles in the water. Before installing, please pay attention to remove the debris in the pipeline, and let the water drain for a long time until the water quality becomes clear before installing the bathroom faucet.

    2. Don't use excessive force to cause man-made damage when opening, just turn it gently. Even traditional faucets do not need to be screwed hard with great effort.

    3. The surface of the faucet should be wiped clean after usual use. Do not use the basin faucet handle as a handrail to support or use it.

    4.Under the condition that the water pressure is not less than 0.02mpa, after a period of use, if the water output is found to be reduced, or even the water heater is turned off, cut off the flow of cold and hot water, and use a wrench to gently unscrew the water nozzle at the outlet of the faucet. The screen cover, after cleaning the impurities and then installing it carefully, can generally be restored as before.

5. The metal hose of the shower head of the bathtub faucet should be kept in a natural stretched state, and do not coil it on the faucet when not in use. At the same time, when using or not using, pay attention not to form a dead angle at the joint of the hose and the valve body, so as not to break or damage the hose.